With non-contact measurement capability, this system has some advantage over conventional measuring systems during measuring soft , elastic or hot materials, such as extrusion of electrical cable, pipe, tube etc .
Using of non-contact laser micrometer, you get some benefits such as accurate control, better quality and save raw materials.
There is no maintenance needs inside the device by user. Do not try to open the cover of device. It use 1 mW, 655nm Laser Module with very fast scanning method.
To be able to get best result from it, lenses should be clean, measured object should be in the center of measuring zone and parameters should be set according to the needs.
| TECHNICAL SPECIFICATION | |
| Measurement Range | 0.5 - 40mm |
| Gate size | 50mm |
| Scan velocity | 70m/s |
| Resolution | 1 μm |
| Repeatability * | ± 1 μm |
| Accuracy * | ± 2 μm or ±%0.3 of reading value |
| Scan Rate | 416 Scan/s |
| Operating temperature | 0-45°C |
| Relative Humidity | 0-95% non-condensing |
| Power supply | 85Vac to 285Vac |
| Dimension (L x W x D) | 384 x 150 x 84mm |
| Power consumption | Less than 10 Watt |
| Outputs / Inputs : | Communication: MODBUS RTU 9600-19200 BAUD RATE RS485 and RS232 Analogue: 0-10Volt de Motorized Potentiometer Control Output: +/- 5 Volt; by changing the polarity Relay Output: (NO) Dry Contact for Alarm Pulse Input: Encoder input for Speed and Length Measurement |